The PRO-MIX lubricating system is manufactured to thoroughly mix lubricant concentrate with water to the desired mixture, and distribute the mixture to each press through an in-plant piping network. Each press coupled to the network will receive a continuous supply of pressurized lubricant. Additionally, the machinery can be manufactured to supply TWO or THREE different mixtures of the lubricant concentrate to each press.
Stock Lubrication System for each individual press
Low Pressure Pedestal Mount
The SPRA-RITE Low Pressure Lubricating System is the only totally NEW and INNOVATIVE method of controlled die or stock lubrication to be introduced to the stamping and drawing industries for over two decades. We are proud to announce that this unique concept was granted a US Patent in July of '96.
The SPRA-RITE Low Pressure Pedestal Lubricating System utilizes independently controlled, electrically operated, highly efficient injector valves to precisely regulate the volume of lubricant applied at specific areas of stamping or drawing tooling, and or the stock, at a predetermined press stroke interval. The Injector valves, which are micro-processor controlled, ELIMINATE all of the Poppets, O-Rings, and Check Valves found in less effective application devices. PRECISE application of lubricant and the elimination of DOWNTIME are achieved through the use of these State of the Art components.
Each SPRA-RITE Low Pressure Pedestal Lubricating System includes a PROCESS CONTROL Module and DATA Display. These controls offer numeric programming of the injector valves, a nozzle PURGE or TEST feature, and BINARY inputs from your machinery to automatically load the desired spray profile into the control.
VERY user-friendly application control is managed by the SPRA-RITE electronic control located within the system console. Totally programmable, the controller INDEPENDENTLY controls EACH Injector with regards to the precise volume of lubricant applied the ability to independently skip press cycles for preprogrammed stroke counts, and timed delay for independent triggering of each nozzle.
Each Spra-Rite Pedestal Lubricating System has an option of utilizing either a five, seven, ten or sixteen gallon stainless steel reservoir. Each reservoir includes a low level float, air regulator, air relief valve, and a liquid filter. Also included with each Low Pressure Pedestal is a one or two gallon secondary reservoir. This reservoir allows the operator to continue running the press while filling the main reservoir with fresh lubricant.
IF YOU DEMAND maximum efficiency, reliability, flexibility, and system control; coupled with increased production rates, reduced lubricant waste, improved environmental conditions, and ease of setup, the SPRA-RITE Lubricating System is for YOU.
Lube System Accessories
Custom Manifolds
8-Injector Manifold
Injector Manifold Assembly which includes the Manifold, Pressure Regulator, Injectors, and Injector Coils. Pressurized lubricant is encapsulated within the manifold assembly until the injection cycle is initiated.
A means to generate the necessary lubricant pressure required to pressurize the manifold assembly.
For our customers who require ONLY the Injector Manifold Assembly for use with their existing processor SPRA-RITE manufactures a Manifold Package including the Injector Manifold - Enclosure Interface Pressure Regulator - Pressure Gauge.
Patented No-Leak Nozzles
Z Nozzle (Zero Drip) Lubricant Application Nozzles
The Z Nozzle lubricant application nozzles incorporate into its design a unique concept for the controlled application of lubricants using a spray lubricator. This revolutionary spray lubricator nozzle assembly combines low pressure with high velocity to produce the most effective means of applying lubricants.
Pro-Mix V
Low Pressure Pedestal Mount
